Search
Play Video

Rib-Pip (Multi)

Reusable pipe for concrete castings
There are two different types of river pip:
Rib-Pip: Reusable tube comes in different sizes starting from size 20
cm and up to 40 cm. The rib pipe also contains the cone so that there is no
It is also necessary to use cones. Additional sizes can be made by
Using two male multi parts and connecting a regular Meriron pipe between them.

Rib-Pip Barnowitz: A special pipe for work in Barnowitz, comes with
Two parts reusable tube (male) and cone (female) to create a barrier
Water to close the hole with a rib-stop close to the back of the stone.

ניתן להזמין את המוצר על ידי יצירך קשר בטלפון

uses

Rib-pipe (multi) is a reusable pipe for repeated preservation in concrete castings that comes in two parts (male and female) and is made with an inverted hammer.

Product benefits

  • Sealing directly on top of the concrete.
  • Using Barnowitz rib-pipe ensures a seal close to the back of the stone.
  • Cost saving, significantly smaller amount of pipes vs
  • A regular Meriron pipe, also without the need for cones.
  • Quick to use by quick retrieval with an adapted device
    for removing pipes.
  • Environmental and green, without plastic residues in the walls.
Select SKU package price per unit Price
1 step
Rib-pipe parts consist of two parts, male which is the reusable pipe, female which is the cone end and is disposable.
2 step
The rib-pipe should be placed between the molds, making sure that the female part is on the side of the stone.
3 step
The concrete casting.
4 step
After casting and disassembling the molds, we are ready to pull out the reusable tube.
5 step
Insert the inverted hammer and screw it clockwise inside the manifold.
6 step
Remove the manifold by pulling the handle with the reverse hammer.
7 step
Perform the opposite operation and remove the reusable tube (be careful not to pull the tube manually but by the device).
8 step
The hole created in the wall is clean for sealing on top of the concrete, the female part remains in the wall.
9 step
Insert the rib-stop into the gun with the exponent for sealing inside the wall next to the stone, it is also possible to seal without an exponent on the concrete at the exit from the wall.
10 step
Insert the rib-stop together towards the female part that remains in the wall.
11 step
Press the rib-stop until it is released from the nut.
12 step
The rib-stop swells in front of the concrete and creates a perfect seal.
Play Video

Rib-Pip (Multi)

uses

Rib-pipe (multi) is a reusable pipe for repeated preservation in concrete castings that comes in two parts (male and female) and is made with an inverted hammer.

Product benefits

  • Sealing directly on top of the concrete.
  • Using Barnowitz rib-pipe ensures a seal close to the back of the stone.
  • Cost saving, significantly smaller amount of pipes vs
  • A regular Meriron pipe, also without the need for cones.
  • Quick to use by quick retrieval with an adapted device
    for removing pipes.
  • Environmental and green, without plastic residues in the walls.
Select SKU package price per unit Price
1 step
Rib-pipe parts consist of two parts, male which is the reusable pipe, female which is the cone end and is disposable.
2 step
The rib-pipe should be placed between the molds, making sure that the female part is on the side of the stone.
3 step
The concrete casting.
4 step
After casting and disassembling the molds, we are ready to pull out the reusable tube.
5 step
Insert the inverted hammer and screw it clockwise inside the manifold.
6 step
Remove the manifold by pulling the handle with the reverse hammer.
7 step
Perform the opposite operation and remove the reusable tube (be careful not to pull the tube manually but by the device).
8 step
The hole created in the wall is clean for sealing on top of the concrete, the female part remains in the wall.
9 step
Insert the rib-stop into the gun with the exponent for sealing inside the wall next to the stone, it is also possible to seal without an exponent on the concrete at the exit from the wall.
10 step
Insert the rib-stop together towards the female part that remains in the wall.
11 step
Press the rib-stop until it is released from the nut.
12 step
The rib-stop swells in front of the concrete and creates a perfect seal.

Contact us

Facebook Twitter Youtube
All rights reserved
*ביטול עסקה בהתאם לתקנות הגנת הצרכן (ביטול עסקה), התשע"א וחוק הגנת הצרכן, התשמ"א-1981
Website construction
Contact us
Approvals
en_USEnglish
he_ILHebrew en_USEnglish

Approvals

Contact us

Skip to content