בורג עיגון לאבן נירוסטה
בורג עיגון לאבן נירוסטה
Declaration of Performance Number 1020-CPD-010031645
According to Regulation EU No 305/2011
Item code: VS11, VS13, VS21, VS31, VS33, VS71, VS81, VS83
Manufacturer: Tecfi S.p.A. - S.S. Appia, km 193 - 81050 Pastorano (CE), Italy
| Table 1 - Intended use | |
|---|---|
| Generic type: | Plastic anchor for multiple use in concrete and masonry for non-structural applications. |
| Base material: | Cracked and non-cracked concrete with strength class C12/15 at minimum and C50/60 at maximum, according to EN 206-1:2000-12, solid masonry, hollow masonry and aerate autoclaved concrete aad ortar stregth class ≥ M 2,5 acording to EN 998-2:2003 |
| Screw material: | Carbon steel grade 5.8 (galvanized min. 5 μm according to ISO 2081) and Stainless steel A4/70 (AISI 316) according to ISO 3506-1 and EN 10088-3 |
| Durability: | Specific screw of galvanized steel: The specific screw made of galvanized steel may only be used in structures subject to dry internal conditions. The specific screw may also be used in structures subject to external atmospheric exposure or exposure in permanently damp internal conditions, if the area of the head of the screw is protected against moisture and driving rain after mounting of the fixing unit in this way, that intrusion of moisture into the anchor shaft is prevented. Therefore there shall be an external cladding or a ventilated rainscreen mounted in front of the head of the screw and the head of the screw itself shall be coated with a soft plastic, permanently elastic bitumen-oil-combination coating (e. g. undercoating or body cavity protection for cars). Specific screw of stainless steel: The specific screw made of stainless steel may be used in structures subject to dry internal conditions and also in structures subject to external atmospheric exposure (including industrial and marine environment), or exposure in permanently damp internal conditions, if no particular aggressive conditions exist. Such particular aggressive conditions are e. g. permanent, alternating immersion in seawater or the splash zone of seawater, chloride atmosphere of indoor swimming pools or atmosphere with extreme chemical pollution (e. g. in desulphurization plants or road tunnels where de-icing materials are used |
| Loading: | Static and quasi-static |
| Fire resistance: | According to the EOTA Technical Report TR 020 "Evaluation of anchorages in concrete concerning resistance to fire" it can be assumed that for fastening of facade systems the load bearing behaviour of the Tecfi VS-Handyplug Ø 10, has a sufficient resistance to fire at least 90 minutes (R90) if the admissible load [FRk / (γM·γF)] is ≤ 0,8 kN (no permanent centric tension load). |
| Fire reaction: | NPD |
| ETA: | ETA 13/0135, issued by DIBT |
| On the basis of: | Etag 020 used as European Assessment Document (EAD) according to Article 66 Paragraph 3 of Regulation (EU) No 305/2011 Attestation of Conformity: EC number 1020-CPD-010031645, issued by TZUS |
| Under system: | 2+ |
פי די אף להורדה